Building Insulation Materials after water, smoke or contamination
Fiberglass, mineral wool, cellulose, foam board and spray foam have different pore structures, facers and attachment. Water can reduce thermal performance, compact fibrous insulation or become trapped against adjacent materials. Cellulose and accumulated soil may support microbial growth. Smoke, sewage or mold in an inaccessible fibrous mass can prevent adequate cleaning; heat may damage facers or binders.
What the inspection covers
Identify insulation and exposed assembly before deciding retention. Contaminated or matted absorbent insulation and material blocking necessary cleaning/drying commonly require controlled removal.
Cleaning, drying and specialist work
Closed-cell foam is not proof that the framing interface stayed dry. Check suspect legacy insulation through qualified assessment before disturbance. Reinstallation must restore the specified thermal, air, vapor and fire-performance assembly after drying/verification.

