Cellulose Insulation after water, smoke or contamination
Loose-fill/blown cellulose is largely fibrous organic cellulose treated for its intended performance; cellulose/bonded fiber and paper facers absorb moisture and can compress, mat or hold water where cavities lack drainage. Fungal growth can use cellulose, organic dust or attached wood surfaces; preservative additives and an insulation fire rating do not make a wetted wall moisture-proof or indefinitely safe.
What the inspection covers
Confirm actual insulation identity, loose-fill versus dense-pack/batt, sprayed adhesive/facer, wetting source and contamination, cavity accessibility, collapsed/dense mats and possible biological residue. Record location and approximate depth only when observed; a wood meter inserted into insulation does not furnish a validated insulation 'MC%'. Room RH cannot prove cavity dry. Assess sheathing/studs and vapor retarders separately.
Cleaning, drying and specialist work
EPA's clean-water mold-prevention matrix recommends discarding wetted cellulose insulation. Water category, mold, odors, inaccessible compressed material and inability to recover original R-value may require removal irrespective of a surface reading. Restore moisture source and dry accessible framing, then re-insulate under the manufacturer's specification and permitted cavity/fire assembly. Price exact affected cavity SF/depth and removal/reinstallation separately when actually scoped and approved.
