Housewrap and Vapor Barriers after water, smoke or contamination
Polyethylene sheeting, building wrap/WRB, air barriers, vapor retarders, drain mats and waterproof membranes control DIFFERENT water pathways: liquid rain, soil capillary rise, air-carried vapor and water-vapor diffusion. A continuous polyethylene layer resists vapor migration; many housewrap materials shed bulk rain yet allow vapor diffusion when designed and installed correctly. Holes, laps, poor flashing and reversed drainage planes defeat expected function. None of these plastics undergo fungal wood rot, but trapped organic sheathing behind them can.
What the inspection covers
Building America/DOE cautions that interior Class I plastic alongside air-permeable insulation on below-grade walls or in some climates can trap masonry-sourced moisture and promote wet framing/mold. Conversely, DOE recommends properly sealed ground covers over soil in crawlspaces to control vapor. These are different INSTALLATION POSITIONS, not contradictory universal 'plastic bad' versus 'plastic good' claims. Inspect climate, existing wall layers and source before recommending an encapsulation/vapor-control change.
Cleaning, drying and specialist work
Document exact cover/membrane type, observed tears and overlaps, drainage/flashings, active seepage versus condensation, damp insulation/OSB, surface temperature/RH and inaccessible cavity. Do not measure a polyethylene 'MC%', assume one 6-mil sheet solves hydrostatic water entry, or blanket-require a particular perm class in every state. A qualified building-envelope/waterproofing professional selects complete drainage/vapor strategy. Restoration opening/cleaning/drying must be authorized separately from rebuilding and inspected for assembly continuity.
