Mineral Wool Insulation after water, smoke or contamination
ROCKWOOL is made from basalt and slag spun into mineral fibers; its particular products are water resistant and vapor permeable. ROCKWOOL states that its stone wool does not wick bulk liquid and, when thoroughly dried, maintains original performance characteristics. This qualified manufacturer statement does not cover every material marketed as 'mineral wool,' all facers/binders, every contaminated flood or water trapped behind the insulation.
What the inspection covers
Identify brand and exact product, location/facer, wetting source and exposure category, attached organic soils, compression/displacement, accessible underside, adjacent sheathing/gypsum framing and what remains trapped. Distinguish visible dry fibers from an uninspected wet cavity. Compare substrate MC and cavity air conditions using appropriate meters; do not assign insulation a wood MC% or declare mold absent because the stone fiber does not serve as a nutrient.
Cleaning, drying and specialist work
For verified clean-water exposure, suitable intact products may be fully dried and retained under manufacturer instructions after inspecting surrounding organic materials. Remove when sewage/chemical residues, visible adherent organic contamination, trapped moisture, damage or inaccessible cavity prevents appropriate decontamination or verification. Restore correct vapor/fire/acoustic system; specialist or qualified installer resolves product integrity doubts.
