Paint and Wallcoverings after water, smoke or contamination
Coatings and wallcoverings alter appearance, cleanability and vapor movement. Water may blister paint, loosen wallpaper adhesive or trap moisture behind a low-permeance covering. Mold may affect the paper/adhesive or concealed substrate. Soot can stain or chemically affect a finish; heat can compromise adhesion. A cleanable coating does not establish a clean substrate.
What the inspection covers
Identify finish and test compatibility before cleaning. Remove failed or contaminated coverings when needed for access and source removal, after checking legacy lead/asbestos hazards.
Cleaning, drying and specialist work
Select any stain/odor sealer only after required cleaning, drying and verification; coating over active moisture or unremoved contamination is not remediation. Match replacement coatings to substrate preparation, moisture and ventilation requirements. Exhaust arrangements for coating vapors must follow product hazards and pressure-control objectives.
