Moisture-Resistant Gypsum Panels after water, smoke or contamination
'Greenboard', treated-paper gypsum, glass-mat faced gypsum and fire-resistant Type X/C are different products; the gypsum core and facer treatment may resist ordinary humidity differently. Gypsum Association guidance says these panels are performance-specific, not intended for constant wetting, ponding or cascading water; most ordinary mold/moisture-resistant gypsum panels are NOT approved as standard shower tile backing. Identify the manufacturer/model and governing assembly, not the wall color.
What the inspection covers
Glass-fiber faces reduce a typical cellulose food source but do not make joint compound, dust, adjacent framing or insulation mold-proof. Wetting can degrade adhesive/fastener interfaces, finish, gypsum core and adjacent assemblies. A lower pinless relative number is not an objective gypsum MC%, and the GA says there is no universal field 'safe %' for gypsum board. The product's mold-resistance laboratory result does not prove any flooded wall is sterile or restorable.
Cleaning, drying and specialist work
Document panel/facer and Type X details if identifiable, exposure source/contamination, actual softness/sag, joints, paint/wall covering, penetrations, backing/insulation and actual comparable readings. Preserve sound cleanable, properly dried and allowed panels only where the project satisfies GA-231 and product criteria; replace flooded/sewage-contaminated or failed panels, with controlled opening where hidden layers warrant it. Restore the tested fire/wet-area assembly with the appropriate qualified trade, not a superficial replacement board.
